Victron RuuviTag Pro thermometers

Pamoja

Connecting the RuuviTag Pro sensors to our Victron Cerbo GX was easy. Just go to the Bluetooth settings in the Cerbo via the Touch 50 or Touch 70 screen and the sensors are detected automatically.

From now on we can check the inside and outside temperature in the cabin, also from home via the VRM. We also set an alarm, because we would rather not have it freeze in the cabin, as this could damage our water system. This is especially important when parking the truck for a long time in winter.

The only downside is that the sensors are mounted with normal screws. So to change the CR2032 batteries you need to unscrew them, but one sensor is hanging outside under our cabin and I do not want to lose it.

So we made special mounting plates that you can screw on somewhere, onto which you mount the Ruuvi sensor with stainless steel bolts. You can do this as often as you want without damaging the thread, like you would with screws.

The downside is that there is no nice screen to show the water, battery level and temperature other than via the screen above.

We bought the Ruuvis at Combinoord and the mounting plate is made by Nevelink.